bitcoin-qt command line arguments · GitHub

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

Bitcoin-qt datadir alternative storage location

I tried asking this in the bitcoincore sub yesterday, but it only has a handful of members and got no answers, so i now try here.
When bitcoin-qt is first started, it asks for the location of datadir. If it is set to a custom location, it remembers it on subsequent launches. Where is this location stored, as no bitcoin.conf is generated in the default location, and i have not seen any other documentation to specify datadir except command line option and bitcoin.conf file?
submitted by varikonniemi to Bitcoin [link] [comments]

PSA: Enable Tor as a simple way to make your node reachable.

Become one of the 10% of node operators that receive incoming connections.
Installing bitcoin core is easy, and with pruning it really isn't the space sink it is characterized as. Even a modest computer can complete the initial block download (IBD) and become a full node. But what some users (90%) find a bit more challenging, is how to become a listening node. Listening nodes are an important part of the network, and are simple enough to enable. I can think of 4 ways to do it:
  1. Operate on an OS and Network that support uPnP, allowing bitcoin to open the ports for you.
  2. Subscribe to a VPN that allows you to open ports through their service.
  3. Manually configure your OS and network to forward port 8333 and 18333.
  4. Run Tor and direct bitcoin to listen through it.
I'll discuss #4. Obviously #1 or #2 are easier, but require a VPN subscription or uPnP enabled HW. And if you live in a dorm or don't control the network, Tor may be the only free option available.
As a bit of background, bitcoin supports three networks that your node can listen on:
Obviously, the more you enable, the better, but here are the basic steps for Tor in broad strokes. If you have any questions post them here and I'll see if we can't help you out:
  1. Download, verify1 and install Gpg4win
  2. Download, verify2, install, and launch Tor Browser
  3. Download, verify3, install, and launch Bitcoin Core
  4. Launch and Admin command console in the directory containing tor.exe
  5. Install the Tor service: tor.exe --service install
  6. CD to service dir: cd %windir%\ServiceProfiles\LocalService\AppData\Roaming\tor
  7. Create and edit a file called torrc with the contents suggested below
  8. Restart tor: tor.exe --service stop && tor.exe --service start
  9. Record the hostname: type .\HiddenService\hostname as
  10. Add the bitcoin.conf options suggested below
  11. Restart the bitcoin-qt program
  12. (Optional) Activate the bitnodes crawler at https://bitnodes.io/nodes/-8333/
It may take a while for your node to show up on bitnodes. I've found the check button sometimes has trouble with onions. Of course you don't need to do it, but it can provide a simple way to check status once your on the list.

torrc file: (replace c:\windows with the proper path as needed)

```

Change to C:\Windows\ServiceProfiles\LocalService\AppData\Roaming

Log notice file \tor\service.log

Bridges may be needed if the Gov't shuts down Tor exit nodes. Get Bridges by

emailing [email protected] from Gmail (only) and uncomment as follows:

Bridge obfs4 : cert= iat-mode=

HiddenServiceDir \tor\HiddenService HiddenServiceVersion 2 HiddenServicePort 8333 127.0.0.1:8333 HiddenServicePort 18333 127.0.0.1:18333 ```

bitcoin.conf file: (entries to be ADDED)

```

Change to what you recorded earlier

onion=127.0.0.1:9050 listen=1 externalip= discover=1 ```
Footnotes:
  • 1 Cert: {Subject: Intevation GmbH; SHA1: c13a65963ad53e78694dd223d518007791a05fe4}
  • 2 PGP Signing Key: 0xEF6E286DDA85EA2A4BA7DE684E2C6E8793298290
  • 3 PGP Signing Key: 0x01EA5486DE18A882D4C2684590C8019E36C2E964
submitted by brianddk to Bitcoin [link] [comments]

Windows / Linux Guide to using Trezor with Bitcoin Core (HWI)

This is a guide to using your Trezor with Bitcoin Core. It may seem like more trouble than it's worth but many applications use Bitcoin Core as a wallet such as LND, EPS, and JoinMarket. Learning how to integrate your Trezor into a Bitcoin Core install is rather useful in many unexpected ways. I did this all through the QT interfaces, but it's simple to script. There is a much simpler guide available from the HWI github, and the smallest Linux TLDR is here
Unfortunately, I don't have access to a Coldcard or Ledger. I'm not sure how the setpin or -stdinpass parameters are handled on that HW.

( A ) Install TrezorCTL, HWI, and build GUI

You only need to set the wallet up once, but may repeat to upgrade

( A.I ) Download extract and install HWI

  1. Download and isntall Python
  2. Download https://github.com/bitcoin-core/HWI/archive/1.1.2.zip
  3. Extract it to a working folder (assumes C:\User\Reddit\src\HWI)
  4. Change Directory (cd) to working folder cd "C:\User\Reddit\src\HWI"
  5. Setup venv python -m venv .venv
  6. Enter venv .venv\Scripts\activate.bat 1
  7. Install dependencies python -m pip install -U setuptools pip wheel
  8. Install TrezorCTL python -m pip install trezor[hidapi]
  9. Install HWI python -m pip install hwi pyside2
  10. Download github.com/libusb/libusb/releases/download/v1.0.23/libusb-1.0.23.7z
  11. Extract MS64\dll\libusb-1.0.dll from the archive
  12. Copy to pywin copy libusb-1.0.dll .venv\Lib\site-packages\pywin32_system32\

( A.II ) Build the QT UI files

  1. Download and install MSYS2
  2. Launch a mingw64.exe shell
  3. CD to working folder cd "C:\User\Reddit\src\HWI"
  4. Enter venv source .venv/Scripts/activate 1
  5. Run UI build bash contrib/generate-ui.sh

( B ) Create a Trezor wallet in Bitcoin Core (testnet)

You only need to set the wallet up once, no private key data is stored, only xpub data

( B.I ) Retrieve keypool from HWI-QT

  1. Launch hwi-qt.exe --testnet (assuming testnet)
  2. Click Set passphrase (if needed) to cache your passphrase then click Refresh
  3. Select you trezor from the list then click Set Pin (if needed)
  4. Ensure your Trezor in the dropdown has a fingerprint
  5. Select Change keypool options and choose P2WPKH
  6. Copy all the text from the Keypool textbox

( B.II ) Create the wallet in Bitcoin QT

  1. Launch Bitcoin Core (testnet) (non-pruned) 2
  2. Select Console from the Window menu
  3. Create a wallet createwallet "hwi" true
  4. Ensure that hwi is selected in the console wallet dropdown
  5. Verify walletname using the getwalletinfo command
  6. Import keypool importmulti '' (note ' caging)
  7. Rescan if TXNs are missing rescanblockchain 3

( C.I ) Grab Tesnet coins

  1. Select the Receive tab in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Select Create new receiving address and copy address
  4. Google "bitcoin testnet faucet" and visit a few sites
  5. Answer captcha and input your addressed copied from C.I.3

( D ) Spending funds with HWI

This is how you can spend funds in your Trezor using Bitcoin Core (testnet)

( D.I ) Create an unsigned PSBT

  1. Select the Send tab in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Verify your balance in Watch-only balance
  4. Rescan if balance is wrong (see B.II.7) 3
  5. Craft your TXN as usual, then click Create Unsigned
  6. Copy the PSBT to your clipboard when prompted

( D.II ) Sign your PSBT

  1. In HWI-QT click Sign PSBT
  2. Paste what you copied in D.I.6 in PSBT to Sign field
  3. Click Sign PSBT
  4. Copy the text for PSBT Result

( D.III ) Broadcast your TXN

  1. Select the Console window in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Finalize PSBT: finalizepsbt
  4. Copy the signed TXN hex from the hex field returned
  5. Broadcast TXN: sendrawtransaction

Final Thoughts

I did this all through the GUI interfaces for the benefit of the Windows users. Windows console is fine, but the quote escaping in windows console is nightmarish. Powershell would be good, but that throws this on a whole another level for most Windows folks.
There is also the need to use HWI-QT due to a bug in blank passphrases on the commandline. You can work around it by toggling passphrase off or on, but again, it's more than I wanted to spell out.
Footnotes:
  • 1. - Later version of python put the activate script under 'bin' instead of 'Script'
  • 2. - You can run pruned, but you need to have a fresh wallet
  • 3. - Rescan is automatic on 'importmulti' but I was pruned so it was wierd
submitted by brianddk to Bitcoin [link] [comments]

Windows Guide to using Trezor with Bitcoin Core (HWI)

This is a guide to using your Trezor with Bitcoin Core. It may seem like more trouble than it's worth but many applications use Bitcoin Core as a wallet such as LND, EPS, and JoinMarket. Learning how to integrate your Trezor into a Bitcoin Core install is rather useful in many unexpected ways. I did this all through the QT interfaces, but it's simple to script. There is a much simpler guide available from the HWI github, and the smallest TLDR is here

( A ) Install TrezorCTL, HWI, and build GUI

You only need to set the wallet up once, but may repeat to upgrade

( A.I ) Download extract and install HWI

  1. Download and isntall Python
  2. Download https://github.com/bitcoin-core/HWI/archive/1.1.2.zip
  3. Extract it to a working folder (assumes C:\User\Reddit\src\HWI)
  4. Change Directory (cd) to working folder cd "C:\User\Reddit\src\HWI"
  5. Setup venv python -m venv .venv
  6. Enter venv .venv\Scripts\activate.bat 1
  7. Install dependencies python -m pip install -U setuptools pip wheel
  8. Install TrezorCTL python -m pip install trezor[hidapi]
  9. Install HWI python -m pip install hwi pyside2
  10. Download github.com/libusb/libusb/releases/download/v1.0.23/libusb-1.0.23.7z
  11. Extract MS64\dll\libusb-1.0.dll from the archive
  12. Copy to pywin copy libusb-1.0.dll .venv\Lib\site-packages\pywin32_system32\

( A.II ) Build the QT UI files

  1. Download and install MSYS2
  2. Launch a mingw64.exe
  3. CD to working folder cd "C:\User\Reddit\src\HWI"
  4. Enter venv source .venv/Scripts/activate 1
  5. Run UI build bash contrib/generate-ui.sh

( B ) Create a Trezor wallet in Bitcoin Core (testnet)

You only need to set the wallet up once, no private key data is stored, only xpub data

( B.I ) Retrieve keypool from HWI-QT

  1. Launch hwi-qt.exe --testnet (assuming testnet)
  2. Click Set passphrase (if needed) to cache your passphrase then click Refresh
  3. Select you trezor from the list then click Set Pin (if needed)
  4. Ensure your Trezor in the dropdown has a fingerprint
  5. Select Change keypool options and choose P2WPKH
  6. Copy all the text from the Keypool textbox

( B.II ) Create the wallet in Bitcoin QT

  1. Launch Bitcoin Core (testnet) (non-pruned) 2
  2. Select Console from the Window menu
  3. Create a wallet createwallet "hwi" true
  4. Ensure that hwi is selected in the console wallet dropdown
  5. Verify walletname using the getwalletinfo command
  6. Import keypool importmulti '' (note ' caging)
  7. Rescan if TXNs are missing rescanblockchain 3

( C.I ) Grab Tesnet coins

  1. Select the Receive tab in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Select Create new receiving address and copy address
  4. Google "bitcoin testnet faucet" and visit a few sites
  5. Answer captcha and input your addressed copied from C.I.3

( D ) Spending funds with HWI

This is how you can spend funds in your Trezor using Bitcoin Core (testnet)

( D.I ) Create an unsigned PSBT

  1. Select the Send tab in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Verify your balance in Watch-only balance
  4. Rescan if balance is wrong (see B.II.7) 3
  5. Craft your TXN as usual, then click Create Unsigned
  6. Copy the PSBT to your clipboard when prompted

( D.II ) Sign your PSBT

  1. In HWI-QT click Sign PSBT
  2. Paste what you copied in D.I.6 in PSBT to Sign field
  3. Click Sign PSBT
  4. Copy the text for PSBT Result

( D.III ) Broadcast your TXN

  1. Select the Console window in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Finalize PSBT: finalizepsbt
  4. Copy the signed TXN hex from the hex field returned
  5. Broadcast TXN: sendrawtransaction

Final Thoughts

I did this all through the GUI interfaces for the benefit of the Windows users. Windows console is fine, but the quote escaping in windows console is nightmarish. Powershell would be good, but that throws this on a whole another level for most Windows folks.
There is also the need to use HWI-QT due to a bug in blank passphrases on the commandline. You can work around it by toggling passphrase off or on, but again, it's more than I wanted to spell out.
Footnotes:
  • 1. - Later version of python put the activate script under 'bin' instead of 'Script'
  • 2. - You can run pruned, but you need to have a fresh wallet
  • 3. - Rescan is automatic on 'importmulti' but I was pruned so it was wierd
submitted by brianddk to TREZOR [link] [comments]

Bitcoin Tor

Subject: PSA: Make your node reachable by using Tor
There is usually a post every few months with someone asking for tips on how to make their node reachable. It's always a hard question to answer since its impossible to know what type of routers and firewalls they are going to have to punch through. This is especially difficult in college dorms. One cheap (and easy) way around it is to to just jump through a few extra steps to make your bitcoin node a bitcoin onion node. Tor is great about traversing routers and firewalls like a hot knife through butter.
  1. Download, verify1, install and initialize Gpg4win
  2. Download, verify2, install, and launch Tor Browser
  3. Download, verify3, install, and launch Bitcoin Core
  4. Launch an Admin command console in the directory with tor.exe
  5. Install the Tor service: tor.exe --service install
  6. CD to service dir: cd %windir%\ServiceProfiles\LocalService\AppData\Roaming\tor
  7. Create and edit a file called torrc with the contents suggested below
  8. Restart tor: tor --service stop && tor --service start
  9. Record your onion hostname: type .\HiddenService\hostname as
  10. Add the bitcoin.conf options suggested below
  11. Restart the bitcoin-qt program
  12. Verify node connectivity at https://bitnodes.io/nodes/-8333/

torrc file: (replace c:\windows with the proper path as needed)

```

Change to C:\Windows\ServiceProfiles\LocalService\AppData\Roaming

Log notice file \tor\service.log HiddenServiceDir \tor\HiddenService HiddenServiceVersion 2 HiddenServicePort 8333 127.0.0.1:8333 HiddenServicePort 18333 127.0.0.1:18333 ```

bitcoin.conf file: (entries to be ADDED)

```

Change to what you recorded earlier

onion=127.0.0.1:9050 listen=1 externalip= discover=1 ```
Footnotes:
  • 1 - Cert-Subject: "Intevation GmbH"  ;  Cert-SHA1: c13a65963ad53e78694dd223d518007791a05fe4
  • 2 - PGP Signing Key: 0xEF6E286DDA85EA2A4BA7DE684E2C6E8793298290
  • 3 - PGP Signing Key: 0x01EA5486DE18A882D4C2684590C8019E36C2E964
submitted by brianddk to brianddk [link] [comments]

How To Stake/Mine Coinevo

EVO Staking/Evo mining

Evo uses Proof of Stake consensus mechanism, which is different from Bitcoin's PoW (Proof of Work). Evo mining process in PoS system is called staking. The block producer will get 6.5EVO, as well as the transaction fees and gases as block reward. So the real reward is usually more than 6.5 evo in total.
Basic requirements for staking:
  1. Run a Coinevo fullnode, and keep online (Since Coinevo is using PoS, we don't need any mining machine, just PC or even Raspberry Pi can run a fullnode);
  2. Have some EVO in the wallet (fullnode)(Any amount of EVO can be used for staking, more EVO means higher possibility to stake).
If you have no EVO yet, please get some from market before you doing following staking settings.
Currently, Coinevo Core wallet is the only wallet that support Coinevo PoS staking. Note that other wallets like mobile wallet and Evo Electrum are not able to stake for the time being.
Two ways to stake:
Either way works in the same way for staking, so you can choose either method you like.

Method 1:Staking with evod (command line)

1. Run evod

Follow the guidance to run evod :
./evod -daemon 
Staking is default on for evod, so no need for other options if you only want to stake.

2. Send some EVO to your wallet

First you can generate a new address with:
./evo-cli getnewaddress 
This will generate a new address with Prefix '1'. You can send some EVO to this new generated address for staking. You can generate as many addresses as you like, and send arbitrary EVO as you like for staking.
Note:The coin should wait for 500 blocks before being able to stake, i.e. about 17 to 24 hours to MATURE..
After the EVO node syncing to the latest block, you can check current balance with ./evo-cli getbalance or get utxo list with./evo-cli listunspent
Please do following steps after your coin is mature.

3. Check staking info

Check current staking info with:
./evo-cli getstakinginfo 
You might get the result like this:
{ "enabled": true, "staking": true, "errors": "", "currentblocktx": 0, "pooledtx": 0, "difficulty": 3693409.779133397, "search-interval": 1577, "weight": 309584575558555, "netstakeweight": 1948540143266404, "expectedtime": 805 } 
enabled means if your wallet have enabled staking, it should be true by default. staking means if your wallet is currently staking (mining). weight stands for the amount of EVO that is staking right now, with unit 10^-8EVO, here in the example, we have 0.532EVO staking. expectedtime stands for the expected time that you will get a reward, the unit is second.

4. How to stake if the wallet is encrypted?

If your wallet is not encrypted, you can skip this section. However, for security, we recommand you encrypt your wallet.
Coinevo wallet can be encrypted with encryptwallet . However, staking will be stopped when it is encrypted. For example, ./evo-cli getstakinginfo for a encrypted wallet:
{ "enabled": true, "staking": false, "errors": "", "currentblocksize": 1000, "currentblocktx": 0, "pooledtx": 94, "difficulty": 5788429.670171153, "search-interval": 0, "weight": 53206430, "netstakeweight": 2438496688951881, "expectedtime": 0 } 
See staking turns to false , which means wallet is not staking.
You can use walletpassphrase to unlock wallet for staking:
./evo-cli walletpassphrase "" 99999999 true 
After unlocking, you can double check getstakinginfo , it should look the same with previous unlocked result, staking become true.

Method 2: Staking with evo-qt wallet (official PC wallet)

Current supported platform: Mac/Linux/Windows.

1. Open Evo qt wallet

Launch the wallet.

2. Send some EVO to your wallet

If you already have some EVO in your wallet, you might skip this step.
Note:The coin should wait for 500 blocks before being able to stake, i.e. about 17 to 24 hours to MATURE..

3. Check staking status

The flash sign at the bottom of wallet shows staking info :
Solid black flash means it is staking now. For more information, you can put your mouse on the flash, e.g.:
Hollow flash measn it is not staking
Possible reasons for not staking:
No flash sign means staking is disabled

About block reward

The block producer will get more than 6.5 EVO rewards, something to keep in mind:

How to disable staking?

Staking is by default enabled for Coinevo wallet. If you need to disable staking for some reason (for example exchanges are always recommanded to disable staking), you might following anyone of the 3 ways below:
1 Add -staking=false when running Coinevo node:
./evod -staking=false -daemon 
For qt wallet, it is like:
./evo-qt -staking=false 
2 Add config staking=false in evo.conf;
3 Encrypt wallet, since encrypted wallet will automatically stop staking.
submitted by coinevo to u/coinevo [link] [comments]

Creamcoin 0.18.0.0 – following Bitcoin’s tale

Creamcoin 0.18.0.0 – following Bitcoin’s tale

06/08/2019 3 min read📷216SHARES216VIEWSShare on Twitter
When new Creamcoin was designed, we had in mind not only a coin that would hold parity with any cryptocurrency, but something that would demonstrate the extra-special capabilities of a decentralized ledger, capable to introduce, help and bring it further to the regular people. Blockchain developing is unstoppable complex process with endless possibilities. Integration of applications on such a technology could achieve better, secure pass of value.
0.18.0.0

On August 5th, 2019 Creamcoin code was successfully updated to the latest Bitcoin version 0.18.0
https://github.com/creamcoin/cream/
With this latest release, we proved that Creamcoin itself it’s not a sort of a tenant to the Bitcoin. Much easier to apply and to pursue the main purpose of existence and to create further innovations in our Cream Line. The new release brings tremendous performance improvements, as well as integration will be much easier for any platform, exchange or integrator. Wallets are available to Releases tab on github
WALLETS

Multi-wallet support

Cream Core now supports loading multiple, separate wallets. The wallets are completely separated, with individual balances, keys and received transactions. Multi-wallet is enabled by using more than one -wallet argument when starting Creamcoin, either on the command line or in the Cream config file. In Creamcoin-Qt, only the first wallet will be displayed and accessible for creating and signing transactions. GUI selectable multiple wallets will be supported in a future version. This feature will continue to be refined with later updates, as there are still some known issues in using the GUI to access the “multiwallet” command. The most notable is that you can’t use coin control features with multiple wallets loaded, or else you will likely retain the wrong wallet when attempting to switch wallets.
When running Cream Core with multi-wallet, wallet-level RPC methods must specify the wallet for which they’re intended in every request. HTTP RPC requests should be send to the :/wallet// endpoint, for example 127.0.0.1:8332/wallet/wallet1.dat/. bitcoin-cli commands should be run with a -rpcwallet option, for example [bitcoin-cli -rpcwallet=wallet1.dat getbalance] A new node-level [listwallets] RPC method is added to display which wallets are currently loaded. Starting command for both wallets should look like this: [creamd -daemon -wallet=wallet1.dat -wallet=wallet2.dat]

Hardware Wallet native compatibility

With a new release of Cream Core the possibility is added in the form of use hardware wallets (Ledger, Trezor, Digital BitBox, KeepKey, Coldcard), but this process is manual and involves the use of Hardware Wallet Interaction (HWI) tool and it needs HW support and addition of Cream in the future, which is not excluded from roadmap. This is a great news for everyone who use Cream Core, and want extra security. Only applies to those who can use command line/CLI (for now), and when some of Hardware wallets actually supports Cream.

SegWit 4MB limit

SegWit replacing the block size limit with a block “weight” limit, allowing up to 4 megabytes of transaction data, and giving a substantial boost in the transaction capacity of the Cream network.

www.creamcoin.com

In the same with the new code update, Creamcoin Team is doing major shifting power, migrating the marketing and promotion activities, from our news site cream.technology to our main page www.creamcoin.com. We will come up with additional statement in this matter, so our supporters and followers have better perspective of Cream Line and the products of it.
In the meantime we are looking into new ways that developers can enhance the capabilities of the Creamcoin protocol, integration of decentralized exchange functionality, lightning network and number of other options that would allow for different types of conditional sends of Creamcoin assets. We are inviting any individual, platform, exchange or integrator who would like to submit recommendations or feature requests, feel free to contribute to the Creamcoin Github.
By Cream Team
submitted by creamcointeam to u/creamcointeam [link] [comments]

How to find/view derivation path in Bitcoin Core

I have found many default path online which is used in bitcoin core, but i still can't get the correct one so that i can import my bitcoin wallet to my electrum wallet (BIP 39 option) with 18 words seed which i had got from bitsblock.io while initial download. I wanted to know exactly how can we find the derivation path in Qt GUI, as i had found a command online wallet.keystore.derivation but it didn't work
submitted by bitsnewbie to Bitcoin [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery key.

Features

Download

Main Release (Main Net)
Testnet Release

Source

ALL NEW! – GroestlcoinSeed Savior

Groestlcoin Seed Savior is a tool for recovering BIP39 seed phrases.
This tool is meant to help users with recovering a slightly incorrect Groestlcoin mnemonic phrase (AKA backup or seed). You can enter an existing BIP39 mnemonic and get derived addresses in various formats.
To find out if one of the suggested addresses is the right one, you can click on the suggested address to check the address' transaction history on a block explorer.

Features

Live Version (Not Recommended)

https://www.groestlcoin.org/recovery/

Download

https://github.com/Groestlcoin/mnemonic-recovery/archive/master.zip

Source

ALL NEW! – Vanity Search Vanity Address Generator

NOTE: NVidia GPU or any CPU only. AMD graphics cards will not work with this address generator.
VanitySearch is a command-line Segwit-capable vanity Groestlcoin address generator. Add unique flair when you tell people to send Groestlcoin. Alternatively, VanitySearch can be used to generate random addresses offline.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then VanitySearch is the right choice for you to create a more personalized address.
VanitySearch is a groestlcoin address prefix finder. If you want to generate safe private keys, use the -s option to enter your passphrase which will be used for generating a base key as for BIP38 standard (VanitySearch.exe -s "My PassPhrase" FXPref). You can also use VanitySearch.exe -ps "My PassPhrase" which will add a crypto secure seed to your passphrase.
VanitySearch may not compute a good grid size for your GPU, so try different values using -g option in order to get the best performances. If you want to use GPUs and CPUs together, you may have best performances by keeping one CPU core for handling GPU(s)/CPU exchanges (use -t option to set the number of CPU threads).

Features

Usage

https://github.com/Groestlcoin/VanitySearch#usage

Download

Source

ALL NEW! – Groestlcoin EasyVanity 2020

Groestlcoin EasyVanity 2020 is a windows app built from the ground-up and makes it easier than ever before to create your very own bespoke bech32 address(es) when whilst not connected to the internet.
If you're tired of the random, cryptic bech32 addresses generated by regular Groestlcoin clients, then Groestlcoin EasyVanity2020 is the right choice for you to create a more personalised bech32 address. This 2020 version uses the new VanitySearch to generate not only legacy addresses (F prefix) but also Bech32 addresses (grs1 prefix).

Features

Download

Source

Remastered! – Groestlcoin WPF Desktop Wallet (v2.19.0.18)

Groestlcoin WPF is an alternative full node client with optional lightweight 'thin-client' mode based on WPF. Windows Presentation Foundation (WPF) is one of Microsoft's latest approaches to a GUI framework, used with the .NET framework. Its main advantages over the original Groestlcoin client include support for exporting blockchain.dat and including a lite wallet mode.
This wallet was previously deprecated but has been brought back to life with modern standards.

Features

Remastered Improvements

Download

Source

ALL NEW! – BIP39 Key Tool

Groestlcoin BIP39 Key Tool is a GUI interface for generating Groestlcoin public and private keys. It is a standalone tool which can be used offline.

Features

Download

Windows
Linux :
 pip3 install -r requirements.txt python3 bip39\_gui.py 

Source

ALL NEW! – Electrum Personal Server

Groestlcoin Electrum Personal Server aims to make using Electrum Groestlcoin wallet more secure and more private. It makes it easy to connect your Electrum-GRS wallet to your own full node.
It is an implementation of the Electrum-grs server protocol which fulfils the specific need of using the Electrum-grs wallet backed by a full node, but without the heavyweight server backend, for a single user. It allows the user to benefit from all Groestlcoin Core's resource-saving features like pruning, blocks only and disabled txindex. All Electrum-GRS's feature-richness like hardware wallet integration, multi-signature wallets, offline signing, seed recovery phrases, coin control and so on can still be used, but connected only to the user's own full node.
Full node wallets are important in Groestlcoin because they are a big part of what makes the system be trust-less. No longer do people have to trust a financial institution like a bank or PayPal, they can run software on their own computers. If Groestlcoin is digital gold, then a full node wallet is your own personal goldsmith who checks for you that received payments are genuine.
Full node wallets are also important for privacy. Using Electrum-GRS under default configuration requires it to send (hashes of) all your Groestlcoin addresses to some server. That server can then easily spy on your transactions. Full node wallets like Groestlcoin Electrum Personal Server would download the entire blockchain and scan it for the user's own addresses, and therefore don't reveal to anyone else which Groestlcoin addresses they are interested in.
Groestlcoin Electrum Personal Server can also broadcast transactions through Tor which improves privacy by resisting traffic analysis for broadcasted transactions which can link the IP address of the user to the transaction. If enabled this would happen transparently whenever the user simply clicks "Send" on a transaction in Electrum-grs wallet.
Note: Currently Groestlcoin Electrum Personal Server can only accept one connection at a time.

Features

Download

Windows
Linux / OSX (Instructions)

Source

UPDATED – Android Wallet 7.38.1 - Main Net + Test Net

The app allows you to send and receive Groestlcoin on your device using QR codes and URI links.
When using this app, please back up your wallet and email them to yourself! This will save your wallet in a password protected file. Then your coins can be retrieved even if you lose your phone.

Changes

Download

Main Net
Main Net (FDroid)
Test Net

Source

UPDATED – Groestlcoin Sentinel 3.5.06 (Android)

Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets).
Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that wallet.
Groestlcoin Sentinel is a fork of Groestlcoin Samourai Wallet with all spending and transaction building code removed.

Changes

Download

Source

UPDATED – P2Pool Test Net

Changes

Download

Pre-Hosted Testnet P2Pool is available via http://testp2pool.groestlcoin.org:21330/static/

Source

submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

How to get Armory to use Bitcoin-Qt's block chain on OSX?

I have Bitcoin-Qt installed and synced on OSX Snow Leopard. When I open Armory, the status shown in the Dashboard area says "Preparing Database".
When I check out Armory Bitcoin Client > Preferences, I see that "Bitcoin-Qt/bitcoind management is not available on OSX".
Is it possible to get Armory to use Bitcoin-Qt's block chain on OSX, or will Armory need to download and verify a second, complete block chain?
edit: spelling
edit: It appears that Armory on OS X is configured by default to use the Bitcoin-Qt block chain. All I had to do is wait ~3 hours for synchronization.
edit: Bitcoin-Qt must be running at the same time as Armory. Shutting down Bitcoin-Qt will take Armory offline.
submitted by BobAlison to Bitcoin [link] [comments]

Reddcoin on Raspberry Pi

A lot of user asked lately, how to run Reddcoin on the popular Raspberry Pi platform. Raspberry Pi is a cheap ARM computer (using junk leftover chips with 10 year lag in technology) but it has enough RAM and consumes around 5 watts, so its ideal to use it for Reddcoin Staking.
This tutorial is not from me, i take NO RESPONSIBILITY about these binaries or the accuracy. This tutorial is created by cryptoBUZE, a fellow member of the Reddcoin community.
Before attempting to follow this tutorial, do a sudo apt-get update
The following commands must be run to install dependencies:
sudo apt-get install libboost-thread-dev
sudo apt-get install libboost-program-options-dev
sudo apt-get install libboost-filesystem-dev
sudo apt-get install libboost-system-dev
Download and install older libssl version - bitcoin clones are using this glorious and fantastic communist product of openssl so it naturally does not works. Its getting totally incompatible after each relase even with itself. Therefore, you must install this, which is the compatible one with the wallet software (no, you cant even compile the code with the newer one) :
wget http://apt.screenlyapp.com/raspbian/pool/main/o/openssl/libssl1.0.0_1.0.1t-1%2Bdeb8u6_armhf.deb
wget http://apt.screenlyapp.com/raspbian/pool/main/o/openssl/libssl-dev_1.0.1t-1%2Bdeb8u6_armhf.deb
sudo dpkg -i libssl1.0.0_1.0.1t-1+deb8u6_armhf.deb
sudo dpkg -i libssl-dev_1.0.1t-1+deb8u6_armhf.deb
Download the wallet software itself:
wget https://github.com/cryptoBUZE/reddcoin/releases/download/raspberrypi/reddcoind
wget https://github.com/cryptoBUZE/reddcoin/releases/download/raspberrypi/reddcoin-cli
wget https://github.com/cryptoBUZE/reddcoin/releases/download/raspberrypi/reddcoin-qt
chmod +x reddcoin\*
When speaking about compatibility, ARM is similar to x86 if you are running user mode applications. You know that every arm based chip needs a different kernel due to the lack of an unified IO system thankfully for the glorious clueless egoistic communist developers at ARM, who succesfully bankrupted the corporation after 25 or so years, and the company got acquired by the japanese softbank. But in user mode, its sort of backward compatible if you have all the proper libraries installed. This means that this will run on any other newer ARM based machine as well (not just raspberry pi-s, on every other arm stuff, chromebooks, or android phones hacked to work with linux).
submitted by GeriGeriGeri to reddCoin [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Homelab collective ressources post!

Hey guys!
I'm fairly new to this sub and to having a home lab in general and I found this community to be so kind and helping, I wanted to give back what I've learned. I'm seeing a lot of questions asked around on improvements and on what to do with x extra hardware so I thought it would be nice to have a thread to regroup that.
 
I'll put here some stuff I gathered and the most common questions I've seen, feel free to contribute and i'll update the post along.
 
Latest Additions
 
Homelab Dashboard
Posts about dashboards have been growing lately and here are some of the best that were kind enough to provide us with their sources.
User Screenshot Source
yours truly http://imgur.com/a/GhCNH https://github.com/Gabisonfire/dashboard-q
lastditchefrt http://i.imgur.com/5zQdao4.png https://github.com/d4rk22/Network-Status-Page
_SleepingBag_ http://i.imgur.com/Ql9ZM4W.png https://github.com/jsank/homelabdash
NiknakSi https://niknak.org/extras/sysinfo TBA
DainBramaged http://imgur.com/jYNlUEQ https://github.com/gordonturneBigBoard
michaelh4u https://i.imgur.com/XkZwMKj.png https://github.com/michaelh4u/homelabfrontpage
spigotx http://imgur.com/a/1zMht https://github.com/spigotx/HomeLab2
SirMaster https://nicko88.com/ https://github.com/dashbad/plex-server-status
yourofl10 http://imgur.com/a/AyROa TBA
TheBobWiley http://imgur.com/a/oU6d3 https://github.com/TheBobWiley/ManageThis-LandingPages
0110010001100010 http://i.imgur.com/iwtQcsL.jpg https://github.com/danodemano/monitoring-scripts
mescon & SyNiK4L https://i.imgur.com/gqdVM6p.jpg https://github.com/mescon/Muximux
ak_rex http://i.imgur.com/a/RJkrT https://github.com/ak-rex/homelab-dashboard
 
Or build yours from scratch: PRTG API, ELK, Grafana, freeboard, JumpSquares
 
Some other resources: Custom Monitoring Scripts by 0110010001100010
 
Credits to apt64 for his original post
= Pi specific =
 
= Download Automation =
 
= Virtualization =
 
= Monitoring =
 
= Media Center =
 
= Remote access =
 
= VOIP =
 
= Networking =
 
= File Servers/Storage/RAID =
 
= Cameras =
 
= Documentation =
 
= Dynamic DNS =
 
= Backup =
 
= Creating network diagrams =
 
= Guides =
 
= Misc =
 
That's all I could come up with on top of my head + some research, passing over to you guys so we can get a nice complete list!
 
Let's try and stick with free(or mostly) softwares, let me know if you guys feel otherwise.
submitted by Gabisonfire to homelab [link] [comments]

Free Bitcoin only WiFi Crypto Command - YouTube What Is Bitcoin Core (BTCC) ? And Why Its Important Compile Bitcoin's source code (0.13) Smart Wallet BitCoin, Credit Cards

The default fee policy can be overridden using the -mintxfee and -minrelaytxfee command-line options, but note that we intend to replace the hard-coded fees with code that automatically calculates and suggests appropriate fees in the 0.9 release and note that if you set a fee policy significantly different from the rest of the network your transactions may never confirm. Bitcoin-Qt changes ... While you have bitcoind or bitcoin-qt running with the -server option, you can then use bitcoin-cli to run commands. It's part of the bitcoind package. If you have your conf file in a custom directory you'll have to specify that to bitcoin-cli as well, otherwise it should just work. Bitcoind – a daemon program that implements the Bitcoin protocol, is controlled through the command line. It is one of the main components of the Bitcoin network node software. Bitcoin software exists in two forms: a GUI application and a background application (daemon on Unix, service on Windows). ./bitcoin-qt Command-line arguments . These commands are accurate as of Bitcoin Core version v0.14.0. Command Description -? Print this help message and exit -version : Print version and exit -alertnotify=<cmd> Execute command when a relevant alert is received or we see a really long fork (%s in cmd is replaced by message) -blocknotify=<cmd> Execute command when the best block changes (%s in ... Don't understand most of the elements that you find in your Bitcoin core wallet or your Altcoin QT wallet? Educate yourself. Make use of this guide where we've explained everything in and out about Crypto currency wallet from backup to encryption to exporting your wallet private keys.

[index] [8153] [13646] [14905] [26668] [24381] [25840] [2225] [21952] [12949] [16693]

Free Bitcoin only WiFi

Discussing bitcoin and other cryptocurrencies! Toast Wallet is a free open source XRP wallet fo iOS, Android, Windows, Mac and Linux. For the Love of Physics - Walter Lewin - May 16, 2011 - Duration: 1:01:26. Lectures by Walter Lewin. They will make you ♥ Physics. Recommended for you Smart Wallet BitCoin, Credit Cards BITCOIN PRICE , BITCOIN FUTURE in doubt http://youtu.be/eO-yrpQpIT8 What is NAMECOIN BITCOIN'S First Fork http://youtu.be/... We cover chapter 3 of Andreas Antonopoulos' book Mastering Bitcoin. Featured are examples of bitcoin-cli commands, and simple Python scripts to interact with the bitcoin blockchain. Referenced links: bitcoin p=np forum.bitcoin. pl bitcoin qt bitcoin qr code bitcoin qt synchronizing with network bitcoin qt wallet location bitcoin qt import wallet bitcoin qt synchronizing with network slow ...

#